Interior lighting is the single change that most often transforms how a room actually feels. The fixture is only half the project — the other half is layout, beam spread, color temperature, dimming compatibility, and switch placement. Apex Power Solutions plans every lighting job on site with the homeowner before we cut a single hole.
Our installs include new-construction and remodel-rated recessed cans, under-cabinet LED strips on dedicated drivers, pendants on rated boxes, and smart switches with neutral conductors where required. Every fixture is matched to a compatible dimmer so it actually dims smoothly to 10% or lower without flicker or buzz.
What's Included
- On-site fixture placement walkthrough before any drywall is cut
- New circuits or extension of existing circuits sized to fixture load
- Remodel-rated, IC-AT recessed cans installed per NEC 314.27
- Under-cabinet LED with low-voltage drivers and dedicated splice locations
- Dimmer selection from the fixture manufacturer's compatibility list
- Smart switch installs (Lutron Caseta, Leviton Decora Smart, Kasa) with neutral wiring
Materials, Equipment & Code
- Halo, Lithonia, or Juno 4" / 6" canless LED downlights, 2700K–3500K to match the room
- Diode LED or American Lighting under-cabinet runs with dimmable 24V drivers
- Lutron, Leviton, or Legrand dimmers matched to LED driver type
- Steel pancake or fan-rated octagon boxes for pendant and ceiling-fixture installs
Safety & Compliance
- Recessed fixtures rated IC (insulation contact) and AT (air-tight) when in insulated ceilings
- Fixture wattage and lumen output verified against the room's circuit load
- Splices made only inside accessible boxes per NEC 300.15
Our 4-Step Process
- 1
Call or Submit the Form
Call Apex Power Solutions LLC at +1 (555) 847-3291 or use the form on this page to describe what you need.
- 2
Free On-Site Assessment & Written Estimate
A licensed electrician visits, assesses the work, and delivers a detailed written estimate with no hidden charges.
- 3
Permitted, Code-Compliant Installation
Once approved, our crew completes the work to current NEC and Georgia code, pulling permits where the job requires inspection.
- 4
Final Walkthrough & Cleanup
The lead electrician walks you through every completed item, demonstrates new equipment, and leaves the work area cleaner than we found it.
Questions about Lighting Installation
Q: Can recessed lighting be added without tearing up the ceiling?
A: Yes. Canless LED downlights install through a hole-saw cut and a single hand-fish to the nearest accessible cavity. Most six- to eight-can installs in a single ceiling are completed in one day with cosmetic damage limited to the can holes themselves.
Q: Will my new LED dimmers work without flicker?
A: Only if the dimmer is on the fixture manufacturer's compatibility list. We pick the dimmer to match the LED driver — usually a Lutron CL or Leviton SureSlide — so you get smooth dimming to a low end without the strobe or pop that mismatched dimmers cause.
Q: Do smart switches need a neutral wire?
A: Most do. We confirm whether your switch boxes have neutrals before quoting. If a box doesn't have a neutral, we either pull one as part of the install or recommend a no-neutral switch (Lutron Caseta) that is designed for that condition.
Related Services
- Outdoor LightingPath, accent, and security lighting installed on dedicated exterior GFCI circuits with low-voltage transformers and weatherproof fittings.
- Ceiling Fan InstallationNew ceiling fans installed on fan-rated boxes with proper switch wiring, balanced blades, and remote or wall control configured.
- Outlets & SwitchesNew, additional, or replacement receptacles and switches — GFCI, AFCI, USB, dedicated, and tamper-resistant per current code.